ADI Engineering PronghornSBC-250-RTR default password and login
We have no confirmed default login for the ADI Engineering PronghornSBC-250-RTR. The label on the underside of the router shows the address, username and password for your unit.
Also searched as: adi engineering pronghornsbc250rtr · adi engineering pronghornsbc 250 rtr · adiengineeringpronghornsbc250rtr
Most common ADI Engineering default
Not confirmed for this exact model - it is the most common address across ADI Engineering routers in our database.
No default login on file - use the label on your router.
How to login
- Connect to the PronghornSBC-250-RTR Wi-Fi network or plug in a cable.
- Type http://192.168.1.1 into the address bar, not the search box.
- Enter the username and password. The label under your router shows the exact ones for your unit.
- Change the admin password and the Wi-Fi password once you are in.
Questions about the ADI Engineering PronghornSBC-250-RTR
What is the ADI Engineering PronghornSBC-250-RTR IP address?
This model's own address is not on file. 192.168.1.1 is the most common ADI Engineering address in our database; if it does not open, use the 'Default Gateway' from your network settings.
What if the ADI Engineering PronghornSBC-250-RTR login does not work?
Check the label on the router for a unit-specific password. If the password was changed and nobody knows it, a factory reset restores the default.
How do I reset the ADI Engineering PronghornSBC-250-RTR?
With the router powered on, press and hold the recessed Reset button for 10-15 seconds. It restarts with the default login, and all your settings are erased.
ADI Engineering IP addresses
Share of the 1 ADI Engineering models in our database whose login address is known.
- 192.168.1.1 100% (1) Open
Ping your router
If the login page will not load, check whether your computer can reach 192.168.1.1 at all:
Other ADI Engineering models
| Model | Username | Password | IP address |
|---|---|---|---|
| Pronghorn SBC250 | - | - | 192.168.1.1 |
Network Toolbox
Port Checker
Check if port 80 or 443 is open on your external IP address for remote access.
Open Port Checker