Bitmain AntRouter R1-LTC default password and login
The default login for the Bitmain AntRouter R1-LTC is username root and password root at http://192.168.200.1.
Also searched as: bitmain antrouter r1ltc · bitmain antrouter r1 ltc · bitmainantrouterr1ltc
Default login
How to login
- Connect to the AntRouter R1-LTC Wi-Fi network or plug in a cable.
- Type http://192.168.200.1 into the address bar, not the search box.
- Enter the username and password. The label under your router shows the exact ones for your unit.
- Change the admin password and the Wi-Fi password once you are in.
Questions about the Bitmain AntRouter R1-LTC
What is the default password for the Bitmain AntRouter R1-LTC?
The Bitmain AntRouter R1-LTC ships with username root / password root. 2 of the 2 Bitmain models in our database with a known default use the same login. If your unit has a label with a different password, the label wins.
What is the Bitmain AntRouter R1-LTC IP address?
The Bitmain AntRouter R1-LTC uses 192.168.200.1 as its default login address.
What if the Bitmain AntRouter R1-LTC login does not work?
Check the label on the router for a unit-specific password. If the password was changed and nobody knows it, a factory reset restores the default.
How do I reset the Bitmain AntRouter R1-LTC?
With the router powered on, press and hold the recessed Reset button for 10-15 seconds. It restarts with the default login, and all your settings are erased.
Default logins across Bitmain models
Share of the 2 Bitmain models in our database whose default login is known.
| Username | Password | Models | Share |
|---|---|---|---|
| root | root | 2 | 100% |
Bitmain IP addresses
Share of the 2 Bitmain models in our database whose login address is known.
- 192.168.200.1 100% (2) Open
Ping your router
If the login page will not load, check whether your computer can reach 192.168.200.1 at all:
Other Bitmain models
| Model | Username | Password | IP address |
|---|---|---|---|
| AntRouter R3-LTC | root | root | 192.168.200.1 |
Network Toolbox
Port Checker
Check if port 80 or 443 is open on your external IP address for remote access.
Open Port Checker