Dynex DX-NRUTERv1 default password and login
We have no confirmed default login for the Dynex DX-NRUTERv1. The label on the underside of the router shows the address, username and password for your unit.
Also searched as: dynex dxnruterv1 · dynex dx nruterv1 · dynexdxnruterv1
Most common Dynex default
No default login on file - use the label on your router.
How to login
- Connect to the DX-NRUTERv1 Wi-Fi network or plug in a cable.
- Type http://192.168.2.1 into the address bar, not the search box.
- Enter the username and password. The label under your router shows the exact ones for your unit.
- Change the admin password and the Wi-Fi password once you are in.
Questions about the Dynex DX-NRUTERv1
What is the Dynex DX-NRUTERv1 IP address?
The Dynex DX-NRUTERv1 uses 192.168.2.1 as its default login address.
What if the Dynex DX-NRUTERv1 login does not work?
Check the label on the router for a unit-specific password. If the password was changed and nobody knows it, a factory reset restores the default.
How do I reset the Dynex DX-NRUTERv1?
With the router powered on, press and hold the recessed Reset button for 10-15 seconds. It restarts with the default login, and all your settings are erased.
Dynex IP addresses
Share of the 4 Dynex models in our database whose login address is known.
- 192.168.2.1 100% (4) Open
Ping your router
If the login page will not load, check whether your computer can reach 192.168.2.1 at all:
Other Dynex models
| Model | Username | Password | IP address |
|---|---|---|---|
| DX-NRUTER | - | - | 192.168.2.1 |
| DX-WEGRTR | - | - | 192.168.2.1 |
| DX-WGRTR | - | - | 192.168.2.1 |
Network Toolbox
Port Checker
Check if port 80 or 443 is open on your external IP address for remote access.
Open Port Checker