Enable Networks CR3000 default password and login
We have no confirmed default login for the Enable Networks CR3000. The label on the underside of the router shows the address, username and password for your unit.
Also searched as: enablenetworkscr3000
Most common Enable Networks default
No default login on file - use the label on your router.
How to login
- Connect to the CR3000 Wi-Fi network or plug in a cable.
- Type http://192.168.99.1 into the address bar, not the search box.
- Enter the username and password. The label under your router shows the exact ones for your unit.
- Change the admin password and the Wi-Fi password once you are in.
Questions about the Enable Networks CR3000
What is the Enable Networks CR3000 IP address?
The Enable Networks CR3000 uses 192.168.99.1 as its default login address.
What if the Enable Networks CR3000 login does not work?
Check the label on the router for a unit-specific password. If the password was changed and nobody knows it, a factory reset restores the default.
How do I reset the Enable Networks CR3000?
With the router powered on, press and hold the recessed Reset button for 10-15 seconds. It restarts with the default login, and all your settings are erased.
Enable Networks IP addresses
Share of the 1 Enable Networks models in our database whose login address is known.
- 192.168.99.1 100% (1) Open
Ping your router
If the login page will not load, check whether your computer can reach 192.168.99.1 at all:
Other Enable Networks models
| Model | Username | Password | IP address |
|---|
Network Toolbox
Port Checker
Check if port 80 or 443 is open on your external IP address for remote access.
Open Port Checker