IBM High Rate Wireless LAN Gateway (DR-E200W) default password and login
We have no confirmed default login for the IBM High Rate Wireless LAN Gateway (DR-E200W). The most common IBM default is username (blank) / password default at 192.168.1.1, used by 100% of the 1 IBM models in our database with a known default.
Also searched as: ibm high rate wireless lan gateway (dre200w) · ibm high rate wireless lan gateway (dr e200w) · ibmhighratewirelesslangateway(dre200w)
Most common IBM default
How to login
- Connect to the High Rate Wireless LAN Gateway (DR-E200W) Wi-Fi network or plug in a cable.
- Type http://192.168.1.1 into the address bar, not the search box.
- Enter the username and password. The label under your router shows the exact ones for your unit.
- Change the admin password and the Wi-Fi password once you are in.
Questions about the IBM High Rate Wireless LAN Gateway (DR-E200W)
What is the default password for the IBM High Rate Wireless LAN Gateway (DR-E200W)?
We have no confirmed default for this exact model. The most common IBM default is username (blank) / password default. Check the label on the underside of the router first.
What is the IBM High Rate Wireless LAN Gateway (DR-E200W) IP address?
The IBM High Rate Wireless LAN Gateway (DR-E200W) uses 192.168.1.1 as its default login address.
What if the IBM High Rate Wireless LAN Gateway (DR-E200W) login does not work?
Check the label on the router for a unit-specific password. If the password was changed and nobody knows it, a factory reset restores the default.
How do I reset the IBM High Rate Wireless LAN Gateway (DR-E200W)?
With the router powered on, press and hold the recessed Reset button for 10-15 seconds. It restarts with the default login, and all your settings are erased.
Default logins across IBM models
Share of the 1 IBM models in our database whose default login is known.
| Username | Password | Models | Share |
|---|---|---|---|
| blank | default | 1 | 100% |
IBM IP addresses
Share of the 2 IBM models in our database whose login address is known.
- 192.168.1.1 100% (2) Open
Ping your router
If the login page will not load, check whether your computer can reach 192.168.1.1 at all:
Other IBM models
| Model | Username | Password | IP address |
|---|---|---|---|
| DR-E200W | blank | default | 192.168.1.1 |
Network Toolbox
Port Checker
Check if port 80 or 443 is open on your external IP address for remote access.
Open Port Checker