IGNITION Design Labs Portal1 default password and login
We have no confirmed default login for the IGNITION Design Labs Portal1. The label on the underside of the router shows the address, username and password for your unit.
Also searched as: ignitiondesignlabsportal1
Most common IGNITION Design Labs default
No default login on file - use the label on your router.
How to login
- Connect to the Portal1 Wi-Fi network or plug in a cable.
- Type http://192.168.8.1 into the address bar, not the search box.
- Enter the username and password. The label under your router shows the exact ones for your unit.
- Change the admin password and the Wi-Fi password once you are in.
Questions about the IGNITION Design Labs Portal1
What is the IGNITION Design Labs Portal1 IP address?
The IGNITION Design Labs Portal1 uses 192.168.8.1 as its default login address.
What if the IGNITION Design Labs Portal1 login does not work?
Check the label on the router for a unit-specific password. If the password was changed and nobody knows it, a factory reset restores the default.
How do I reset the IGNITION Design Labs Portal1?
With the router powered on, press and hold the recessed Reset button for 10-15 seconds. It restarts with the default login, and all your settings are erased.
IGNITION Design Labs IP addresses
Share of the 3 IGNITION Design Labs models in our database whose login address is known.
- 192.168.8.1 100% (3) Open
Ping your router
If the login page will not load, check whether your computer can reach 192.168.8.1 at all:
Other IGNITION Design Labs models
| Model | Username | Password | IP address |
|---|---|---|---|
| Portal | - | - | 192.168.8.1 |
| Portal SAP001 | - | - | - |
| Portal (SAP102) | - | - | 192.168.8.1 |
Network Toolbox
Port Checker
Check if port 80 or 443 is open on your external IP address for remote access.
Open Port Checker