Kyocera KR2 default password and login
We have no confirmed default login for the Kyocera KR2. The most common Kyocera default is username (blank) / password admin at 192.168.0.1, used by 100% of the 1 Kyocera models in our database with a known default.
Also searched as: kyocerakr2
Most common Kyocera default
How to login
- Connect to the KR2 Wi-Fi network or plug in a cable.
- Type http://192.168.0.1 into the address bar, not the search box.
- Enter the username and password. The label under your router shows the exact ones for your unit.
- Change the admin password and the Wi-Fi password once you are in.
Questions about the Kyocera KR2
What is the default password for the Kyocera KR2?
We have no confirmed default for this exact model. The most common Kyocera default is username (blank) / password admin. Check the label on the underside of the router first.
What is the Kyocera KR2 IP address?
The Kyocera KR2 uses 192.168.0.1 as its default login address.
What if the Kyocera KR2 login does not work?
Check the label on the router for a unit-specific password. If the password was changed and nobody knows it, a factory reset restores the default.
How do I reset the Kyocera KR2?
With the router powered on, press and hold the recessed Reset button for 10-15 seconds. It restarts with the default login, and all your settings are erased.
Default logins across Kyocera models
Share of the 1 Kyocera models in our database whose default login is known.
| Username | Password | Models | Share |
|---|---|---|---|
| blank | admin | 1 | 100% |
Kyocera IP addresses
Share of the 2 Kyocera models in our database whose login address is known.
- 192.168.0.1 100% (2) Open
Ping your router
If the login page will not load, check whether your computer can reach 192.168.0.1 at all:
Other Kyocera models
| Model | Username | Password | IP address |
|---|---|---|---|
| KR1 | blank | admin | 192.168.0.1 |
Network Toolbox
Port Checker
Check if port 80 or 443 is open on your external IP address for remote access.
Open Port Checker