Microsoft Router IP Address and Username Password

Microsoft is a widely used and extremely famous router brand responsible for manufacture and produce of a variety of routers used for various purposes ranging from any household Wi-Fi equipment to office area network. A Microsoft router is a widely used hardware component which can be used along with a personal computer hooked on an internet connection. A router basically functions as a device that spread a a single network over a large area where each and every device functions as a part of the entire network. The Microsoft router handles exchange of packets of data and information in between all the various devices connected wirelessly to it. Essentially a Microsoft router can be used to convert a single network source like an Ethernet cable into a Local Area Network (LAN).

In case you are already equipped with a Microsoft router, you can access the gateway admin login page for any configurations or a change in settings required in order to smoothen and enhance your network surfing experience. Follow the instructions given below to enter your administrative panel and have full access to control over your own network.

Microsoft Default IP Address

You can pick the right IP Address of Microsoft from the list below and click on Admin button. If you choose right, You will be redirected to your Microsoft Router Login Admin Interface.

LOGIN STEPS TO Microsoft

In order to enter your admin web page, you would first need to hook up to a mother device, locate and reach your Microsoft router gateway page and login using the default username and password provided. Follow the steps given below and you are good to go:

  • CONNECTING A DEVICE TO THE Microsoft ROUTER

    You will need any device, be it a personal computer, a Laptop, a tablet or even a smart phone to act as the mother device connected to the Microsoft router to enter the admin panel. This device is known as the mother device that is the first device connected via the Microsoft router to the internet and has access to all its internal modifications.

    The mother device can be connected to the router by two means, namely wirelessly or through a wired connection.

    • WIRELESS: In case of a desktop setup, after turning on the Microsoft router, you should enter the Wi-Fi credentials to the network configuration options in the network and connectivity section. In case of a laptop, smart phone or tablet, you can just turn on the Wi-Fi option and connect to your router network. Keep in mind that it is not necessary for the Microsoft router to have network access at this stage.
    • WIRED: In case you are using a mother device that cannot connect wirelessly, or you want to take the traditional approach of connecting through a wired connection, you can do so easily with the use of an Ethernet cable. Simply by connecting one end to the Microsoft router and the other identical end to the device, you have successfully obtained a wired connection to your mother device. It should be kept in mind, however, that this method has a major drawback. This method cannot be used if the intended mother device does not have a Ethernet cable port.

    Now that you have successfully connected your mother device, you are all set to move on to the next step.

  • ENTERING Microsoft ADMIN LOGIN PAGE

    Now that you have your mother box device successfully connected, your next step would be to enter the admin login of Microsoft webpage.

    • To do this, first you need to enter into your preferred web browser like Chrome, Firefox, Safari, Opera, etc. You should first clear all the cache memory of the web browser as the cache can often interfere in the login procedure.
    • After you have done that, you should click on the address search bar and enter the IP Address 192.168.2.1. You can find it on the back of the Microsoft router or on the packaging it came it. It can also be found easily with a quick web search specifying the router brand name and model number. It is usually something numerical similar to 192.168.2.1.
    • On entering the correct IP Address which are 192.168.2.1, you will enter your Microsoft router gateway page. Here you can view a Username box and a Password waiting for you.
  • LOGGING IN WITH DEFAULT LOGIN INFORMATION

    After successfully entering the admin login page, you will be asked with an SSID or username and a password. The default username and password are generally something along the lines of 'admin' 'password' 'root' or sometimes it is just left blank entirely.

    In order to find out your router’s default username and password, check the backside of the Microsoft router body, or, the packaging it came it since it is usually always present there. If you still cannot find it, try a quick web search along with the model name of your Microsoft router. This will give you your username and password. On entering the correct SSID and password, the admin page will open up. Now you easily change or regulate all your network settings.

Microsoft Default Logins

100%
IP Address
192.168.2.1
Username
admin
Password
-

CHANGING PASSWORD on Microsoft

One of the first things you should attempt after a successful log in is to change your login password. Since the default login password and username is easily and readily available to anyone with access to the Microsoft router directly ar anyone who knows the router model and brand name, it is very easy for any foreign unwanted personnel to infiltrate into your home router network and either make changes to its settings or to arbitrarily change the password of your Microsoft router, barring your access to your own network.

To avoid this, immediately after a successful login, you need to change the default password into something difficult to crack, including capital cases and special characters. Follow the steps given below in order to change the password to your Microsoft router login:

  • Open the Microsoft router setup page by entering the default username and password provided to you.
  • After successful login, go to advanced options and select administration. Select the set password option.
  • Here you will need to enter your default password. Then you will be asked to enter your new password.
  • You will have to enter your new password one more time for conformation. Press apply button after that to successfully change your login password.

Always try to remember the password you have provided. Also, do not forget to select Enable Password Recovery option, in case if you do forget it later, you can easily re-obtain it.

Microsoft Router Various Models

MODEL NAMEUSERNAME / PASSWORDIP ADDRESS
MN-500admin / -192.168.2.1
MN-500A1admin / -192.168.2.1
MN-700- / -192.168.2.1

TROUBLESHOOT Microsoft

In case you find yourself facing some difficulties down the line pertaining to your router admin login, some crucial and very common recovery procedures have been listed below to be of your assistance.

  • RECOVERING PASSWORD

    If by any case you forget your admin log in password, you can easily regain the access to your gateway panel by following the steps given below:

    • Go to your Microsoft router log in page by entering the 192.168.2.1 IP Address you had entered before which is oriented on your router.
    • After the page opens, select cancel.
    • Anew page will now open where your log in password recovery process will begin.
    • You will need to enter the router serial number which is usually printed on the surface of the Microsoft router so that the system can identify the router as yours.
    • Now you will need to answer some security questions.
    • After successfully giving the right answers, your previous log in password will be made visible before you.
    • Remember to later change that password again to avoid any breach of security.
  • RESTORING FACTORY SETTINGS

    Restoring your Microsoft router to the factory settings is a kind of last moment resort. In cases such as hacking, forceful change of user name and password or if you cannot get the security questions right, you would need to restore your Microsoft router. Follow the given steps in order to restore your Microsoft router to the way it used to be when you first bought it.

    • Make sure, before starting the restore process, that the power light of the router is on. In other words, make sure that the router had a stable current source.
    • You now need to locate the restore button on your Microsoft router. In most cases it is concealed inside a hole or hid unscrupulously in order to prevent pressing it by mistake.
    • Now grab a pin or any sharp object in case you cannot reach the reset button directly and hold it down continuously for about 8 seconds.
    • Once the button is released, the reset procedure will start automatically.
    • After waiting for a minute or two, enter the admin log in page and repeat the login procedure, but remember to enter the default user name and password of the router this time.
  • FOR FURTHER TROUBLE

    In case you are still facing some problem, make sure:

    • The cache space of your browser is completely empty.
    • All firewalls, proxy servers, VPNs, ad blockers, popups and anti-viruses have been deactivated as these can hamper the login procedure.
    • The firmware is up to date with no ware updates pending.
    • Only the mother device is connected to the Microsoft router. In case other devices are connected, deactivate them and then proceed.
    • The Microsoft router has been shut down, left for more than 10 seconds and then has been rebooted before starting the login procedure.

If the above steps have still been unable to be of your assistance, contact your internet service provider (ISP) or Router Company to receive immediate professional and technical support.

RESETTING Microsoft ROUTER TO FACTORY SETTINGS

Resetting a router in the final procedure in case all else has failed. In extremely dire cases such as when the user name and login password of your router has been changed along with the security questions by an outside source without your knowledge or permission. In such cases, no amount of troubleshooting is helpful for your Microsoft router. But, resetting the router will completely remove any and all changes and personalization you have ever made on your router and bring it back to its factory settings. In other words, it will return to the way it was when you first bought it from the market.

Before beginning the reset procedure, it should be made sure that all other troubleshooting options like rebooting and password update are not working and it is necessary to undergo the reset procedure. The Microsoft router reset procedure is a little complicated. So, you must follow the steps and instructions given bellow exactly as written because if you do not follow the procedure, no matter how much or how many times you press the reset button, it will not make any change.

  • FINDING THE RESET BUTTON

    The reset button is usually hidden inconspicuously so as to prevent people from pressing the reset button involuntarily .It can be concealed inside a hole or some may also have the reset button stick out. In certain rare models, the WPS button can also serve as a reset button in disguise. In some cases like concealed in a hole, you may not be able to reach it directly and may require the aid of some sharp object like a pin to press the button.

  • HOW TO PRESS THE RESET BUTTON

    Ensuring that the Microsoft router remains powered on, that is, the Microsoft router has current supply and is turned on, press the reset button and keep holding for 30 seconds. Without leaving the button, turn off the power supply and keep holding the reset button for 30 more seconds. After that is complete, keep pressing the reset button while you turn the power supply back on.

  • RECONFIGURATION

    Since the router has been returned to its factory settings, it is always advisable to change the password so that others cannot access and hamper your network settings. You can also configure secondary modifications like security measures and child settings to keep your network the way you are comfortable with. If you want to keep the factory settings you can obviously skip this step but it always recommended to improve security, privacy and protection.

Now, your Microsoft router will begin its reset procedure. This is known as the 30-30-30 router reset method.

WHAT IS A ROUTER AND HOW DOES IT WORK?

A router is a rectangular shaped piece of network hardware with usually comes with two or more antenna like projections. Various companies like Microsoft, TP-Link, D-Link, Asus etc. are some of the most widely known and used router brands. In its basic sense, a router essentially connects a local area network to the internet. Now a days, the transport of information across the internet usually occurs from router to router, until it finally reaches its intended destination.

A Microsoft router acts as the centre of the network that oversees and regulates the exchange and transport of data from one system to another. Data usually travels in the form of small packets and the router determines from where a packet originates and its intended destination.

Usually, the most common places where we can see routers are residential and small office networks. The Local Area Network formed by a router that is connected wirelessly is usually known as a Wi-Fi. This has led to a common misconception of the terms Wi-Fi and router. A Wi-Fi thus refers to a common connection to the internet, but obviously, a stable network connection has to be already active for a Wi-Fi to exist. A Microsoft router on the other hand has direct connection to the internet, usually via an Ethernet or fibre optic cable and allows other devices to connect through it to the internet, thus giving rise to a Wi-Fi network. For a basic internet package the cost lies around about 50 to 100 dollars a month. Some packages come even cheaper than that. This coupled with factors like presence of internet service providers in even the most remote locations and the high availability of cheap routers owing to online marketing has transformed router based Wi-Fi networks from a novelty feature of high end businesses and offices to a household every day necessity. This popularity and easy availability has helped spread stable internet connection to almost any corner of the world and routers have played an integral role in it.

Microsoft produce and manufacture powerful and robust routers which are made with high end equipments to provide the user the best service at the lowest possible cost. Microsoft Routers are known to be easily hackable and anyone can enter unnoticed if proper security measures are not followed. This is why it is always a good idea to update your pass word regularly and never leaving any firmware or antivirus update patches pending because these greatly aid in solidifying the security, privacy and authenticity of any home based network systems and protect the member devices from uninvited guests.

SIMILAR ROUTERS to Microsoft: