Netcore NW725P default password and login
The default login for the Netcore NW725P is username guest and password guest at http://192.168.1.1.
Also searched as: netcorenw725p
Default login
How to login
- Connect to the NW725P Wi-Fi network or plug in a cable.
- Type http://192.168.1.1 into the address bar, not the search box.
- Enter the username and password. The label under your router shows the exact ones for your unit.
- Change the admin password and the Wi-Fi password once you are in.
Questions about the Netcore NW725P
What is the default password for the Netcore NW725P?
The Netcore NW725P ships with username guest / password guest. 6 of the 6 Netcore models in our database with a known default use the same login. If your unit has a label with a different password, the label wins.
What is the Netcore NW725P IP address?
The Netcore NW725P uses 192.168.1.1 as its default login address.
What if the Netcore NW725P login does not work?
Check the label on the router for a unit-specific password. If the password was changed and nobody knows it, a factory reset restores the default.
How do I reset the Netcore NW725P?
With the router powered on, press and hold the recessed Reset button for 10-15 seconds. It restarts with the default login, and all your settings are erased.
Default logins across Netcore models
Share of the 6 Netcore models in our database whose default login is known.
| Username | Password | Models | Share |
|---|---|---|---|
| guest | guest | 6 | 100% |
Netcore IP addresses
Share of the 5 Netcore models in our database whose login address is known.
- 192.168.1.1 100% (5) Open
Ping your router
If the login page will not load, check whether your computer can reach 192.168.1.1 at all:
Other Netcore models
| Model | Username | Password | IP address |
|---|---|---|---|
| 605GR | guest | guest | - |
| NW616 | guest | guest | 192.168.1.1 |
| NW618 | - | - | - |
| NW702 | guest | guest | 192.168.1.1 |
| NW705P | guest | guest | 192.168.1.1 |
| NW725 | guest | guest | 192.168.1.1 |
Network Toolbox
Port Checker
Check if port 80 or 443 is open on your external IP address for remote access.
Open Port Checker