Radiolocus WM02 default password and login
The default login for the Radiolocus WM02 is username admin and password admin at http://192.168.10.1.
Also searched as: radiolocuswm02
How to login
- Connect to the WM02 Wi-Fi network or plug in a cable.
- Type http://192.168.10.1 into the address bar, not the search box.
- Enter the username and password. The label under your router shows the exact ones for your unit.
- Change the admin password and the Wi-Fi password once you are in.
Questions about the Radiolocus WM02
What is the default password for the Radiolocus WM02?
The Radiolocus WM02 ships with username admin / password admin. If your unit has a label with a different password, the label wins.
What is the Radiolocus WM02 IP address?
The Radiolocus WM02 uses 192.168.10.1 as its default login address.
What if the Radiolocus WM02 login does not work?
Check the label on the router for a unit-specific password. If the password was changed and nobody knows it, a factory reset restores the default.
How do I reset the Radiolocus WM02?
With the router powered on, press and hold the recessed Reset button for 10-15 seconds. It restarts with the default login, and all your settings are erased.
Default logins across Radiolocus models
Share of the 1 Radiolocus models in our database whose default login is known.
| Username | Password | Models | Share |
|---|---|---|---|
| admin | admin | 1 | 100% |
Radiolocus IP addresses
Share of the 1 Radiolocus models in our database whose login address is known.
- 192.168.10.1 100% (1) Open
Ping your router
If the login page will not load, check whether your computer can reach 192.168.10.1 at all:
Other Radiolocus models
| Model | Username | Password | IP address |
|---|
Network Toolbox
Port Checker
Check if port 80 or 443 is open on your external IP address for remote access.
Open Port Checker