Runtop WR-1230 default password and login
The default login for the Runtop WR-1230 is username admin and password (blank) at http://192.168.1.1.
Also searched as: runtop wr1230 · runtop wr 1230 · runtopwr1230
Default login
How to login
- Connect to the WR-1230 Wi-Fi network or plug in a cable.
- Type http://192.168.1.1 into the address bar, not the search box.
- Enter the username and password. The label under your router shows the exact ones for your unit.
- Change the admin password and the Wi-Fi password once you are in.
Questions about the Runtop WR-1230
What is the default password for the Runtop WR-1230?
The Runtop WR-1230 ships with username admin / password (blank). 3 of the 3 Runtop models in our database with a known default use the same login. If your unit has a label with a different password, the label wins.
What is the Runtop WR-1230 IP address?
The Runtop WR-1230 uses 192.168.1.1 as its default login address.
What if the Runtop WR-1230 login does not work?
Check the label on the router for a unit-specific password. If the password was changed and nobody knows it, a factory reset restores the default.
How do I reset the Runtop WR-1230?
With the router powered on, press and hold the recessed Reset button for 10-15 seconds. It restarts with the default login, and all your settings are erased.
Default logins across Runtop models
Share of the 3 Runtop models in our database whose default login is known.
| Username | Password | Models | Share |
|---|---|---|---|
| admin | blank | 3 | 100% |
Runtop IP addresses
Share of the 3 Runtop models in our database whose login address is known.
- 192.168.1.1 67% (2) Open
- 192.168.1.254 33% (1) Open
Ping your router
If the login page will not load, check whether your computer can reach 192.168.1.1 at all:
Other Runtop models
Network Toolbox
Port Checker
Check if port 80 or 443 is open on your external IP address for remote access.
Open Port Checker