ZTE MF10 default password and login
The default login for the ZTE MF10 is username admin and password admin at http://192.168.0.1.
Also searched as: ztemf10
ZTE notes
ISP-branded ZTE gateways often use a sticker password. 192.168.100.1 is common on the modem/ONT side.
How to login
- Connect to the MF10 Wi-Fi network or plug in a cable.
- Type http://192.168.0.1 into the address bar, not the search box.
- Enter the username and password. The label under your router shows the exact ones for your unit.
- To change Wi-Fi settings go to Network → WLAN → WLAN Basic / Security.
Questions about the ZTE MF10
What is the default password for the ZTE MF10?
The ZTE MF10 ships with username admin / password admin. 3 of the 6 ZTE models in our database with a known default use the same login. If your unit has a label with a different password, the label wins.
What is the ZTE MF10 IP address?
The ZTE MF10 uses 192.168.0.1 as its default login address.
What if the ZTE MF10 login does not work?
ISP-branded ZTE gateways often use a sticker password. 192.168.100.1 is common on the modem/ONT side. Check the label on the router for a unit-specific password. If the password was changed and nobody knows it, a factory reset restores the default.
How do I change the Wi-Fi password on the ZTE MF10?
Log in, then go to Network → WLAN → WLAN Basic / Security. Save, then reconnect your devices with the new password.
How do I reset the ZTE MF10?
With the router powered on, press and hold the recessed Reset button for 10 seconds. It restarts with the default login, and all your settings are erased.
Default logins across ZTE models
Share of the 6 ZTE models in our database whose default login is known.
| Username | Password | Models | Share |
|---|---|---|---|
| admin | admin | 3 | 50% |
| ltecl4r0 | 1admin0 | 1 | 17% |
| 1admin0 | ltecl4r0 | 1 | 17% |
| blank | admin | 1 | 17% |
ZTE IP addresses
Share of the 5 ZTE models in our database whose login address is known.
- 192.168.1.1 60% (3) Open
- 192.168.0.1 40% (2) Open
Ping your router
If the login page will not load, check whether your computer can reach 192.168.0.1 at all:
Other ZTE models
| Model | Username | Password | IP address |
|---|---|---|---|
| MF28B | - | - | - |
| MF28D | - | - | - |
| MF28G | - | - | - |
| WF820+ | 1admin0 | ltecl4r0 | 192.168.1.1 |
| WF820#ERROR! | ltecl4r0 | 1admin0 | 192.168.1.1 |
| ZXDSL 931WII V1 | admin | admin | 192.168.1.1 |
| ZXHN H108N v2 | - | - | - |
| ZXHN H108Nv1.x | admin | admin | - |
| ZXHN H108Nv2.5 | - | - | - |
| ZXHN H118Na v2.3 | blank | admin | 192.168.0.1 |
| ZXHN H118Nv2.3 | - | - | - |
| ZXHN H389A | - | - | - |
| ZXV10 H618B | - | - | - |
| ZXV10 H618BE8 | - | - | - |
| ZXV10 W300E | - | - | - |
Network Toolbox
Port Checker
Check if port 80 or 443 is open on your external IP address for remote access.
Open Port Checker